GRASS logo

NAME

r.random.surface - Generates random surface(s) with spatial dependence.

KEYWORDS

raster

SYNOPSIS

r.random.surface
r.random.surface help
r.random.surface [-uq] output=string[,string,...] [distance=float] [exponent=float] [flat=float] [seed=integer] [high=integer] [--overwrite]

Flags:

-u
Uniformly distributed cell values
-q
No (quiet) description during run
--overwrite
Force overwrite of output files

Parameters:

output=string[,string,...]
Names of the resulting maps
distance=float
Input value: max. distance of spatial correlation (value >= 0.0, default [0.0])
exponent=float
Input value: distance decay exponent (value > 0.0), default [1.0])
flat=float
Input value: distance filter remains flat before beginning exponent, default [0.0]
seed=integer
Input value: random seed (SEED_MIN >= value >= SEED_MAX), default [random]
high=integer
Input value: maximum cell value of distribution, default [255]

DESCRIPTION

r.random.surface generates a spatially dependent random surface. The random surface is composed of values representing the deviation from the mean of the initial random values driving the algorithm. The initial random values are independent Gaussian random deviates with a mean of 0 and standard deviation of 1. The initial values are spread over each output map using filter(s) of diameter distance. The influence of each random value on nearby cells is determined by a distance decay function based on exponent. If multiple filters are passed over the output maps, each filter is given a weight based on the weight inputs. The resulting random surface can have "any" mean and variance, but the theoretical mean of an infinitely large map is 0.0 and a variance of 1.0. Description of the algorithm is in the NOTES section.

The random surface generated are composed of floating point numbers, and saved in the category description files of the output map(s). Cell values are uniformly or normally distributed between 1 and high values inclusive (determined by whether the -u flag is used). The category names indicate the average floating point value and the range of floating point values that each cell value represents.

r.random.surface's original goal is to generate random fields for spatial error modeling. A procedure to use r.random.surface in spatial error modeling is given in the NOTES section.

Parameters:

output
Output map(s): Random surface(s). The cell values are a random distribution between the low and high values inclusive. The category values of the output map(s) are in the form "#.# #.# to #.#" where each #.# is a floating point number. The first number is the average of the random values the cell value represents. The other two numbers are the range of random values for that cell value. The "average" mean value of generated output map(s) is 0. The "average" variance of map(s) generated is 1. The random values represent the standard deviation from the mean of that random surface.
distance
Input value(s) [default 0.0]: distance determines the spatial dependence of the output map(s). The distance value indicates the minimum distance at which two map cells have no relationship to each other. A distance value of 0.0 indicates that there is no spatial dependence (i.e., adjacent cell values have no relationship to each other). As the distance value increases, adjacent cell values will have values closer to each other. But the range and distribution of cell values over the output map(s) will remain the same. Visually, the clumps of lower and higher values gets larger as distance increases. If multiple values are given, each output map will have multiple filters, one for each set of distance, exponent, and weight values.
exponent
Input value(s) [default 1.0]: exponent determines the distance decay exponent for a particular filter. The exponent value(s) have the property of determining the "texture" of the random surface. Texture will decrease as the exponent value(s) get closer to 1.0. Normally, exponent will be 1.0 or less. If there are no exponent values given, each filter will be given an exponent value of 1.0. If there is at least one exponent value given, there must be one exponent value for each distance value.
flat
Input value(s) [default 0.0]: flat determines the distance at which the filter
weight
Input value(s) [default 1.0]: weight determines the relative importance of each filter. For example, if there were two filters driving the algorithm and weight=1.0, 2.0 was given in the command line: The second filter would be twice as important as the first filter. If no weight values are given, each filter will be just as important as the other filters defining the random field. If weight values exist, there must be a weight value for each filter of the random field.
high
Input value [default 255]: Specifies the high end of the range of cell values in the output map(s). Specifying a very large high value will minimize the "errors" caused by the random surface's discretization. The word errors is in quotes because errors in discretization are often going to cancel each other out and the spatial statistics are far more sensitive to the initial independent random deviates than any potential discretization errors.
seed
Input value(s) [default random]: Specifies the random seed(s), one for each map, that r.random.surface will use to generate the initial set of random values that the resulting map is based on. If the random seed is not given, r.random.surface will get a seed from the process ID number.

NOTES

While most literature uses the term random field instead of random surface, this algorithm always generates a surface. Thus, its use of random surface.

r.random.surface builds the random surface using a filter algorithm smoothing a map of independent random deviates. The size of the filter is determined by the largest distance of spatial dependence. The shape of the filter is determined by the distance decay exponent(s), and the various weights if different sets of spatial parameters are used. The map of independent random deviates will be as large as the current region PLUS the extent of the filter. This will eliminate edge effects caused by the reduction of degrees of freedom. The map of independent random deviates will ignore the current mask for the same reason.

One of the most important uses for r.random.surface is to determine how the error inherent in raster maps might effect the analyses done with those maps. If you wanted to check to see how sensitive your analysis is to the errors in the DEMs in your study area, see:

"Visualizing Spatial Data Uncertainty Using Animation (final draft)," by Charles R. Ehlschlaeger, Ashton M. Shortridge, and Michael F. Goodchild. Submitted to Computers in GeoSciences in September, 1996, accepted October, 1996 for publication in June, 1997.

"Modeling Uncertainty in Elevation Data for Geographical Analysis", by Charles R. Ehlschlaeger, and Ashton M. Shortridge. Proceedings of the 7th International Symposium on Spatial Data Handling, Delft, Netherlands, August 1996.

"Dealing with Uncertainty in Categorical Coverage Maps: Defining, Visualizing, and Managing Data Errors", by Charles Ehlschlaeger and Michael Goodchild. Proceedings, Workshop on Geographic Information Systems at the Conference on Information and Knowledge Management, Gaithersburg MD, 1994.

"If%20you%20are%20interested%20in%20creating%20potential%20realizations%20of%20categoricalcoverage%20maps,%20see%20r.random.model.

SEE%20ALSO

r.random, r.mapcalc

REFERENCES

Random Field Software for GRASS by Chuck Ehlschlaeger

As part of my dissertation, I put together several programs that help GRASS (4.1 and beyond) develop uncertainty models of spatial data. I hope you find it useful and dependable. The following papers might clarify their use:

"Visualizing Spatial Data Uncertainty Using Animation (final draft)," by Charles R. Ehlschlaeger, Ashton M. Shortridge, and Michael F. Goodchild. Submitted to Computers in GeoSciences in September, 1996, accepted October, 1996 for publication in June, 1997.

"Modeling Uncertainty in Elevation Data for Geographical Analysis", by Charles R. Ehlschlaeger, and Ashton M. Shortridge. Proceedings of the 7th International Symposium on Spatial Data Handling, Delft, Netherlands, August 1996.

"Dealing with Uncertainty in Categorical Coverage Maps: Defining, Visualizing, and Managing Data Errors", by Charles Ehlschlaeger and Michael Goodchild. Proceedings, Workshop on Geographic Information Systems at the Conference on Information and Knowledge Management, Gaithersburg MD, 1994.

"Uncertainty in Spatial Data: Defining, Visualizing, and Managing Data Errors", by Charles Ehlschlaeger and Michael Goodchild. Proceedings, GIS/LIS'94, pp. 246-253, Phoenix AZ, 1994.

AUTHORS

Charles Ehlschlaeger, Michael Goodchild, and Chih-chang Lin; National Center for Geographic Information and Analysis, University of California, Santa Barbara.

Last changed: $Date: 2006/04/13 19:01:37 $


Main index - raster index - Full index